To Next PageTo Next Page
Need help?Do you have a question about the Hughes & Kettner SPIRIT AMPMAN Series and is the answer not in the manual?
General| Brand | Hughes & Kettner |
|---|---|
| Model | SPIRIT AMPMAN Series |
| Category | Recording Equipment |
| Language | English |
Covers essential safety guidelines regarding water, electrical hazards, heat, user limitations, and product care.
Provides critical steps before operation, manufacturer liability disclaimers, and warnings about high volume levels.
Details the sonic characteristics of Channel A and Channel B for both AmpMan Classic and Modern models.
Explains the function of Gain, Tone, Resonance, Presence, Sagging, and Volume knobs for each channel.
Details the function of the FX Loop and Boost buttons, including their LEDs and Smart Mode integration.
Explains the Master and Solo Master knobs and the Solo activation switch for overall volume control.
Describes the Input, Noise Gate, FX Send, FX Return, and Red Box AE+ DI Out connections on the rear panel.
Details the eight available cabinet simulation settings and their application for tone shaping.
Guides on setting the Red Box output level for Line or Mic signals and connecting to audio interfaces.
Explains switching cabinet emulation off for the Red Box output to use external software or processors.
Details connecting headphones, using the Phones output as a line out, and adjusting the volume level.
Describes connecting external audio sources like backing tracks or drum machines via the Aux In.
Explains the function of the power button for turning the AmpMan on and off.
Details the Auto Eco System (AES) power-saving feature and its activation/deactivation.
Instructions on how to enable and disable Smart Mode by holding specific buttons on the amp.
Provides a method to check if Smart Mode is active by testing Boost settings across channels.
Details the speaker output's impedance range and power handling for connecting external cabinets.
Provides cautions and recommendations for connecting two speaker cabinets simultaneously.
Information on connecting the included universal power supply and associated safety precautions.
