Huka Duet - Power Support System Start Up and Riding

20
9.5 Start up
Before using the cycle, always check the throttle has returned to zero position.
The system has to be switched off. Now turn the throttle into the maximum speed
position. Now release the throttle. The throttle should now move itself back into the
zero position.
Open up the cover of the key switch.
Put the key into the key switch and turn the key into “ON” position.
Now put the key out of the key switch so you cannot lose it while riding the cycle. Put
the cover back on to the key switch.
Step on the cycle.
Now you push the ON/OFF button on the throttle for 2 seconds. Now you can start to
ride the cycle by starting to pedal. At the same time you gently turn the throttle so the
power support will help you ride the cycle.
If the throttle has a problem returning in to the zero position,
don’t use the cycle. Have the system checked by a Huka BV
authorized person.