1
9
V
5
V
/2
.
1
A
5
V
/2
.
1
A
1
2
V
O
N
/
O
F
F
7
FUNCTION ON SMART BATTERY JUMPER CABLE
1. Reverse polarity connection: Solid Red LED with fast 2 short beep.
2. Short-circuit protection: Solid Red LED with long beep (Beeping as 3.3Hz Frequency).
3. Over-heat protection: Solid red LED with Long beep (Beeping as 2Hz Frequency).
4. Over-discharging protection: Solid red LED with fast 2 short beep.
5. Green/Red LED flashing: Searching for status of connection.
6. Green Led: Correct connection after one beep
PRODUCT FEATURES
1. LED display 2. Flashlight 3. Battery terminal socket
4. Power button 5. 19V - 3.5A output 6. 5V - 2.1A output
7. 12V - 4A output 8. 18V/1.5A input 9. Power ON/OFF
3
2
4
5
6
7
8
9
1
Note: The jump start LED display will shut down after 20 seconds of inactivity.
Press the power button (4) to reactivate.
To Next Page