Need help?Do you have a question about the HULTDINS SuperSaw 6000S and is the answer not in the manual?
General| Brand | HULTDINS |
|---|---|
| Model | SuperSaw 6000S |
| Category | Construction Equipment |
| Language | English |
Describes essential safety instructions for operators before using the equipment.
Explains the hazard levels indicated by Danger, Warning, and Caution messages.
Details safe operating procedures, checks, and environmental considerations.
Addresses the risk of chain breakage and high-speed ejection of parts.
Outlines safety measures for operators and bystanders near the equipment.
Covers safety precautions and procedures during maintenance activities.
Provides guidelines and steps for safe welding on the equipment.
States restrictions against unauthorized modifications to the equipment.
Illustrates and lists the primary components of the SuperSaw 6000S grapple saw.
Details the two available lubrication oil tank options for the SuperSaw 6000S.
Identifies and describes the location and function of the adjustment valves.
Shows the location of the hydraulic pressure test points on the saw.
Illustrates the three main hydraulic connection ports on the SuperSaw 6000S.
Describes the main parts that constitute the SuperSaw 6000S saw unit.
Explains the product labels, including serial number and CE-label, and their locations.
Provides detailed technical specifications including dimensions and hydraulic system data.
Lists dimensions and specifications for the heavy-duty rotator bracket.
Describes the special tools supplied or required for servicing the grapple saw.
Explains the function of the eye bolt for lifting and handling the grapple saw.
Details the use of the retraction tool for bar holder adjustments.
Presents the hydraulic system diagram with a list of components.
Explains the operation of the chain lubrication system, including pumps and oil supply.
Instructions for filling the saw motor casing with hydraulic oil before initial startup.
Details the procedure for adjusting the saw bar feed out pressure using a gauge.
Describes how to adjust the saw bar feed out speed using the restrictor valve.
Explains how to adjust the saw bar retraction speed via air pressure.
Instructions for setting the chain tension pressure using the regulating valve.
Procedure for removing air from the chain tension system.
Step-by-step guide for replacing the saw chain on the grapple saw.
Instructions for removing and installing a new saw bar.
Details the process for disassembling and installing the bar holder.
Guide for safely removing and installing the drive sprocket.
Procedure for refilling the chain lubrication oil tank.
General guidelines and checks for regular maintenance of the grapple saw.
Specific tasks and checks to be performed daily.
Information on lubricating the saw unit, including points and grease specifications.
Guidance on checking and tightening fasteners during the first month of operation.
To Next Page