humantouch.com
10
11
ENGLISH
take a seat
1. Deploy the foot and calf massager
FOR A FOOT OR CALF MASSAGE
2. Insert your feet or calves
While sitting in the chair, use the remote control legs-up button to raise the footrest to a comfortable position.
For a foot massage, pull up on the footrest release handle, then rotate the footrest away from the chair just
until the foot and calf massager is facing up. Do not rotate it so far that it clicks into position; the footrest
should be moving freely for a foot massage.
For a calf massage, pull up on the footrest release handle, then rotate the footrest away from the chair until it
clicks into position with the foot and calf massager facing up. Do not force the rotation of the footrest past
the point at which it clicks to lock. Excess force may damage the mechanism
.
Do not stand or sit on the foot and calf massager.
Adjust the foot and calf massager width
Use the Width buttons, located on the top of the foot
and calf massager, to adjust the massage well width for
maximum comfort.
Press and hold the
button to increase the width; Press
and hold the
button to decrease it. The LED display
indicates the current setting.
Footrest release handle
To Next Page
Loading...
