Human Touch iJOY Active 2.0 - get ready; Remove the robot safety screw

humantouch.com
55
humantouch.com
4
Your Human Touch iJOY massage chair requires some simple assembly.
Simply attach the seat cushion and support pillow, remove the robot safety
screw, plug it in, and you’re done!
4. Attach the support pillow.
2. Gently raise the backrest to
the upright position.
1. Remove the robot safety screw.
Attach the support pillow to the chair using the hook-and-loop fasteners.
The backrest automatically locks into place.
CAUTION: You must remove the robot safety screw before powering on your chair,
usingtheprovidedAllenwrench.Discardthescrewandwrenchafterremoval.
get ready
5. Plug it in.
First plug the power cord into the chair’s power panel, and then
plug the other end into an appropriate power source.
Power cord
Support pillow
Back of chair
Unpack the box
Chair base
Support pillow
Seat cushion
Power cord
3. Attach the seat cushion.
Align and press the seat cushion
firmly into place.
Backrest
Seat cushion
ENGLISH
Robot safety screw
Allen wrench
Allen wrech