For more detailed operation instructions,
please see the Use and Care Manual.
Novo XT
Remote Control User Guide
STOP/POWER/RESTORE —
Press this button:
• To power on the remote.
• Then select STOP to stop your
massage immediately.
• Select POWER OFF, then select
RESTORE to return the chair to the
upright position before exiting.
MENU — Displays the main menu.
LEGS — Press and hold to raise
or lower the footrest.
CURRENT PROGRAM — Details
of current program, including
program name, intensity levels,
and current focus area.
LEGS EXTEND — Press and hold
to extend the footrest.
Use the up/down/left/right
buttons to navigate the screen;
press OK to select.
POSITION — Use to move the
massage rollers to the desired
position when enjoying a Zone
or Spot massage.
TIME REMAINING — Shows the
total amount of remaining time
of your massage session.
BACK — Press and hold to recline
or incline the backrest.
LEGS RETRACT — Press and
hold to retract the footrest.
ZeroG
®
— Press and hold to
automatically position the chair
in ZeroG mode, raising your feet
above your heart for maximum
spine relief.
AUTO — Displays the Auto
Programs menu. When an auto
program is running, press to toggle
among the auto programs. The
active program displays at the top
of the status screen.
Need help?
General
