Human Touch zero G 5.0 - Chair Setup and Initial Use; Unpacking and Power Connection; Attaching the Head Pillow

5
humantouch.com
4
get ready
Unpack the box
Chair Base
Head Pillow
Feed the head pillow tongue behind the
two head pillow straps from the top. Fold
the bottom of the flap upward and attach
it to the head pillow using the zipper.
3. Attach the head pillow.
Setting up your Human Touch Massage Chair is easy. Just
attach the head pillow, and you’re done!
ENGLISH
1. Power on
2. Use the incline button on the controller to raise the chair to
the upright position.
Plug the power cord into a grounded power
source. Turn the master power switch (on
the left-hand side of the chair) to On.
NOTE: When you press the incline button,
the footrest raises before the backrest
inclines; this is a safety feature.
Head pillow
Head pillow tongue
Head pillow
Bottom of the flap