HumaRoll | User manual
10
5.2 Controls and Indicators
1 Program buttton Switch ON or OFF the instrument
2 Power LED Green LED shows power on
3 Speed control Knob Clockwise rotate to increase the speed, counter clock-
wise to reduce the speed
5.3 Normal operation
- Connect the power cable
- Load the to be mixed tubes to the rolls
- Rotate the speed control knob to set target speed
- Switch ON instrument
- The instrument begins running
- Switch OFF the instrument after the mixtime is reached
FIGURE 4
1 Power switch
2 Power LED
3 Speed control knob
TABLE 2
To Next Page
