Humanscale CPU600 User Manual

CPU600
Installation
Instructions
Step 3:
Slide Quick Track Cover into Track.
Step 4:
Use Thumb Screws to secure Quick Track Cover to Track. Your
Quick Track system is now installed.
Removal:
To remove CPU600 from the Track, loosen Thumb Screws,
remove Quick Track Cover, and slide unit off the Track.
Track
Quick Track
Cover
Thumb Screws
CPU600 Track Installation
HSI-CPU600-207

Humanscale CPU600 Specifications

General

Product Type	CPU Holder
Material	Steel, Plastic
Color	Black
Width Adjustment	Yes
Height Adjustment	Yes
Rotation	360 degrees
Compatibility	Most CPUs
Mounting Type	Under-Desk Mount

Summary

CPU600 Track Installation

Track Installation Steps

Instructions for sliding the Quick Track Cover into the Track and securing it with Thumb Screws.

CPU600 Track Removal

Procedure to remove the CPU600 from the Track by loosening screws, removing the cover, and sliding the unit off.

CPU600 Installation Instructions

CPU Installation

Steps for installing the CPU unit, including adjusting height, side brackets, and mounting rails.

Track Installation

Instructions for positioning and attaching the track to the underside of a desk using tape and screws.