Victor Reader ClassicX 3.3 User’s Guide
V6
Be sure your headphones are plugged into the headphone jack and not the line-out jack.
The volume control works only for the headphone jack, which is the jack nearest you on
the right side of the player. The line-out jack is for connecting to another device such as a
stereo or tape recorder.
5. What is the purpose of the Remote jack?
The remote jack is a 2.5mm jack located on the right side of the player. It is located on
the right side of the player. It is the second jack from the back and it is marked with a
single embossed line. Plugging a push-button (usually a footswitch) into this jack allows
the user to control the play/pause and rewind functions remotely. Each time the
footswitch is pressed, the play/pause function is toggled. Pressing and holding the
Footswitch activates the rewind function.
You may use many types of push-buttons to operate the player’s remote functions. The
only requirement is that it needs to be a normally open contact switch. This means that
the electrical circuit is closed only when the button is pressed.
To Next Page
Loading...
Need help?
Battery
Operating Environment
Ports & Interfaces
Weight and Dimensions
