114
Operation: chassis
Bumper guard (option)
4
Fig. 82 Bumper guard, side
1 Bumper guard, individual section
The bumper guard is optionally
obtainable and serves to protect the
chassis frame when the trailer is being
loaded and unloaded, for example, with a
fork-lift truck.
The bumper guard consists of screwed-
on hard rubber strips.
The bumper guard can be attached in
individual sections between platform
gate hinges or in a continuous line.
Fig. 83 Bumper guard, side view
1 Bumper guard, continuous line
Fig. 84 Bumper guard, rear view
1 Bumper guard, sections
1
1
1
To Next Page
