Inspection, care and maintenance
251
Maintenance intervals
1
2
3
4
5
6
7
8
Tab. 2 Maintenance table
Maintenance work
Every
500 km
or 14 days
1500 km
or 30 days
5000 km
or 3 months
10000 km
or 6 months
20000 km
or 12 months
Axle and wheel brake
*1
: Check state and wear
Wheel nuts: Check they are secure and adjust if necessary X X
Towing eye: Lubricating XX
Lighting system: Check for damage X
Wheels: Check air pressure, tyre wear X
Compressed-air system: Check for leaks/crack formations X
Hydraulic system/hoses: Check for leaks/crack formations X
Shock absorbers: Check for escaping oil X
Towing eye / drawbar: Check for wear and firm seating X
Electro-hydraulic unit: Check for fluid loss / check battery condition X
Line filter of the pressure system: Clean X
Brake system: Draining the compressed-air tank X
All attachments: Check they are secure X
Screw connections of spring leaks, shock absorber and axle connections: Visual inspection X
Screws/riveted joints on body/chassis: Visual inspection X
*1
: You will find information on the maintenance in the manufacturer's operating instructions
To Next Page
