General information
35
Spindle support identification
1
2
3
4
5
6
7
8
Two types of spindle support are
installed by the manufacturer haacon:
the geared support winch and the swivel
support:
A nameplate is attached to identify the
geared support winch / swivel support.
haacon hebetechnik gmbh
Josef- Haamann-Strasse 6
D-97896 Freudenberg
Tel. 09375-84-0
Fax: 09375-84-66
www.haacon.de
If you have any queries, specify
the factory no. / type and the
year of construction.
Read and comply with the rele-
vant operating and maintenance
manuals.
Geared support winch
Fig. 41 Geared support winch
1 Manufacturer specs
2 Technical data
3 Inspection badge
Swivel support
Fig. 42 Swivel support
1 Manufacturer specs
2 Technical data
3 Inspection badge
1
2
3
1
2
3
To Next Page
Loading...
