66
Operation
Check before departing and when parking
3
Departure check
– Trailer properly coupled.
– Brake and supply lines are
connected.
– Hydraulic lines are connected.
– Electrical lines and & EBS cable are
connected.
– Side guard is down and secured.
– Support equipment is up and
secured.
– Platform gates/curtains/posts are
closed and secured.
– Screw parking brake/spring-loaded
parking brake is released.
– Raising/lowering system is in drive
position.
– Toolbox is closed and secured.
– Ramp planks are slid in, ramp plank
bay is closed and secured.
– Drive-up ramps are up and secured.
– Wheel chocks are properly secured.
– Warning signs are retracted and
secured.
Check when parking
– The trailer is properly uncoupled.
– Screw parking brake/spring-loaded
parking brake is actuated.
– Wheel chocks are under the wheels.
– Support equipment is extended and
secured.
– Brake and supply lines are
disconnected and parked.
– Electrical line & EBS cable are
disconnected and parked.
– Hydraulic lines are disconnected and
parked.
– Raising/lowering system is in park
position.
– Platform gates/curtain are closed.
– Posts/lashing equipment are stowed.
– Toolbox is closed.
– Ramp planks are slid in, ramp plank
bay is closed and secured.
– Drive-up ramps are up and secured.
– Warning sign is extended.
To Next Page
Loading...
