EasyManua.ls Logo

HumidiCup S1 - Location Advice; Alerts and Indicators; Optional Parts; Warranty Information

HumidiCup S1
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
bigger humidor or a cigar cabinet. More M1 are recommended for a non-refrigeration cabinet with space
more than 8 cubic feet (230 liters) or a refrigerator with space more than 2 cubic feet (60 liters).
6. Location
You may put the humidifier in a humidor or a cigar cabinet after the humidifier has been installed and set
to regulate the desire humidity level. Make sure the air paths of the humidifier has not been blocked. It is
recommended the humidifier to be placed with the LED up toward. Keep at least 2” (50mm) clearance
from the side air outlet of humidifier to cigars or wall of a humidor and 0.2” (5mm) clearance from the top
air inlet to the lid. For a cabinet application, it is recommended that the humidifier to be placed on the
centre position of the top layer, and if there are more humidifiers, the second humidifier to be placed on the
centre position of the middle layer. The thin ribbon cable be used to pass through the lid seam and keep the
air-tightness.
7. Alerts
Fan failure, The LED displays and the buzzer sounds to indicate ‘fan failure’ when the built-in
fan fails.
Lack of water,
When the displayed humidity value is at least 10% lower than the humidity setting
value for two hours, the LED displays
and the buzzer sounds to indicate ‘lack of water’.
8. Optional parts
External fan
, used to enhance the air circulation of the cigar storage environment.
Serial connection cable
, used to connect multiple humidifiers in series to simplify the power supply.
Up to three humidifiers can be powered by one set of power supply with the serial connection cables.
9. Warranty
Smart-lion Technology Co., Ltd. warrants goods of its manufacture as being free
of defective materials and faulty workmanship. If the warranted goods are
returned to Smart-lion company during the warranty period of one year from the
purchasing date. We will repair or replace the electronic parts without charge
those items it finds defective. The warranty only applies to original purchaser at
retailed and may not be transferred.
10. Frequent Questions and Answers
10.1 Can users contact the manufacturer for technical or quality issues?
Yes. You may contact the seller or HumidiCup support staff by sending an email to
sales@humidicup.com for any technical or quality issues. Usually we will reply you within 24
hours.
10.2 Can the humidifiers be used with moisturizing liquid such as Propylene
Glycol?
No. Only DISTILLED or PURIFIED WATER can be used. Our test and many cases have
shown long-term close to Propylene Glycol will cause the humidity sensor to drift to a higher
value irreversibly.
10.3 Can the DC connector of power cord be connected to the ‘external fan’
port on the side of the control unit?
Yes. The ‘5VDC in’ port and ‘External fan/5VDC out’ port is circuit connected in parallel, and
either can be used as power supply port. But don’t connect power supply to the two ports
at the same time.
10.4 Does the power cord affect the sealing of a humidor or a cigar cabinet?
No. The power cord is equipped with a 0.3mm thickness ribbon cable, which passes through
the seam of the lid and keep air-tightness.
10.5 How many humidifiers are needed for a refrigerated cigar cabinet?
The refrigeration function of a refrigerated cabinet has significant dehumidification
WATER
HUMIDIFICATION
SOLUTION
Propylene Glycol
DISTILLED