13
Power
Your Device
To Use
• Provide a minimum of 6 inches of clearance on all sides of the unit.
DO NOT cover or obstruct cooling fan vents; otherwise, overheating
could occur.
• Insert red key into ON/OFF keyhole. Turn right for “ON;” turn left for
“OFF.”
• MAKE SURE VOLTAGE AND AMPERAGE OF BOTH CHARGING
SOURCE AND UNIT ARE COMPATIBLE.
• Instructions are the same for using AC, USB and DC options:
AC Outputs:
• Connect AC plug into either Outlet A or Outlet B (120 V 1000 W
max) and turn on AC Switch 1.
USB Outputs:
• If using a tablet, pad or laptop, connect USB plug into either
Outlet C or Outlet D (2.1 A) and turn on USB Switch 2.
• If using a cell phone or other device, connect USB plug into either
Outlet E or Outlet F (1 A) and turn on USB Switch 2.
DC Outputs:
• Connect DC plug into either Outlet G (12 V, 10 A max.) or
Outlet H (12 V, 25 A max.), depending on appliance or device.
• When not in use, turn either Switch 1 or Switch 2 off and turn
the red key to the left.
Consult with your appliance manufacturer to verify proper voltage and
amperage compatibility.
humless.com
To Next Page
Loading...