5. Turn the ratchet counterclockwise to loosen the
wheel nuts.
6. Remove the three wheel nuts holding the spare tire
onto the tire carrier.
7. Pull off and gently lower the spare tire to the
ground. Set it next to the flat tire.
The tools you’ll be using to finish changing a flat tire
include the following:
A. Jack
B. Wheel Blocks
C. Jack Handle
D. Jack Handle
Extension
E. Wheel Wrench
F. Ratchet
Before proceeding, be sure to set the wheel blocks at
the appropriate tires as shown previously.
5-78
To Next Page
Loading...
Need help?
General
