Hummer 2005 H2 User Manual

Removing the Flat Tire and
Installing the Spare Tire
1. To remove the center
cap, place the flat end
of the wheel wrench
in the slot on the wheel
and gently pry the
center cap out.
2. Slide the ratchet onto the wheel wrench with the
DOWN mark facing you.
3. Turn the ratchet counterclockwise to loosen the
wheel nuts. Don’t remove them yet.
You will now need to jack the vehicle up using the
instructions following.
5-79

Hummer 2005 H2 Specifications

General

Brand	Hummer
Model	2005 H2
Category	Automobile
Language	English