Returning the Seatbacks to an
Upright Position
{ CAUTION
If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.
{ CAUTION
A safety belt that is improperly
routed, not properly attached, or
twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to be
sure that the safety belts are
properly routed and attached, and
are not twisted.
To return the seatback(s) to the
upright position:
1. Lift the seatback up and push it
all the way rearward.
2. Reach under the front seat and
lift the cushion while moving it
rearward until it latches.
3. Pull forward on the seatback and
push down on the seat cushion
to make sure the seat is
securely in place.
1-8 Seats and Restraint System
To Next Page
Loading...
