The front head restraints can also be tilted forward in
addition to being slid up or down. To tilt either of
the front head restraints do the following:
Pull the head restraint toward you until you hear a click.
Then let go. The head restraint will stay in this position
unless you pull it forward more until another click is
heard. There are four positions available: initial position,
first click, second click, and third click. After the
third position (three clicks) is reached, pulling the head
restraint farther will release it back to the normal
upright position.
The rear head restraints can be slid up or down just as
the front head restraints, but they do not tilt.
Rear Seats
Rear Seat Operation
Entering or Exiting the Third Row Seats
To enter or exit the third row seat (if equipped) you
must fold the second row seat down following the
instructions later in this section. See “Folding the
Seatbacks” under 60/40 Split Bench Seat on page 1-7.
If you are exiting the third row seat with no assistance,
do the following:
1. Reach over the second
row seat and pull up on
the strap loop. Then
pull the seat cushion up
and push it forward.
1-6
To Next Page
Loading...
Need help?
General
