Humminbird ICE HELIX CHIRP Series User Manual

Use Combo Views
Combo Views display two views (or more) on the screen at the same time. To
change the settings, select menus or actions, or change the size of either view,
you must select the view as the Active Pane from the X-Press Menu.
X-Press Menu > Active Pane
Customize the Display
To quickly change display settings like Sonar Colors, Chart Speed, and Gain,
use the X-Press Menu. To change advanced display settings like Units of
Measure, Time and Date, adjust for Daylight Saving Time, display Digital
Readouts, etc., use the Main Menu > Setup tab. Press the MENU key twice
to open the Main Menu.
NOTE: Some menu settings are only available in Advanced User Mode.
To change the User Mode to Advanced, go to Main Menu > Setup tab >
User Mode.
Download your Operations Manual
For additional instructions and information about your control head,
download the operations manual from our Web site at humminbird.com.
NOTE: Your control head is compatible with other transducers and can
be used on open water. To activate open water features, go to Main
Menu > Sonar tab > Open Water.
NOTE: Your control head is compatible with Humminbird® LakeMaster®
maps. To purchase LakeMaster region maps, visit our Web site
at humminbird.com. To purchase individual lake maps, visit
https://chartselect.humminbird.com.
in
dic
at
es
t
h
e
A
c
t
ive
Pan
e
Flasher/Sonar View
4
© 2018 Johnson Outdoors Marine Electronics, Inc. All rights reserved.
ICE_HELIX_QSG_532586-1EN_B.qxp_Layout 6 7/13/18 5:22 PM Page 4

Humminbird ICE HELIX CHIRP Series Specifications

General

Brand	Humminbird
Model	ICE HELIX CHIRP Series
Category	Sonar
Language	English