Do you have a question about the Humminbird 398ci SI Combo and is the answer not in the manual?
Display Type | Color TFT |
---|---|
Display Pixel Matrix | 320 x 240 |
Sonar Type | DualBeam Plus |
Side Imaging | Yes |
Down Imaging | Yes |
Power Output (RMS) | 500 Watts |
Power Output (Peak to Peak) | 4000 Watts |
GPS | Yes |
Chartplotting | Yes |
Temperature | Yes |
Speed | Yes |
Backlight | Yes |
Mount A Type | Gimbal |
GPS Receiver | Internal |
GPS Trackplotting | Yes |
Waypoints | 3000 |
Humminbird PC | Yes |
Upgradable Internal Software | Yes |
Split Screen Zoom | Yes |
Bottom Lock | Yes |
Large Digits View | Yes |
Wide/Narrow Cone Split Screen | Yes |
Custom View Selections | Yes |
Display Colors Grayscale | 256 Colors |
Temperature Alarm | Yes |
Transducer | XNT 9 SI 180 T |
Waterproof Rating | IPX7 |
Display Resolution | 320 x 240 |
Max Depth | 1500 ft |
Depth Capability | 1500 ft |
Target Separation | 2.5 inch |
Power Output | 500 W |
Waypoints, Routes, Tracks/Points | 50 Routes |
Explains Side Imaging sonar for wide area survey and detailed bottom topography.
Describes the 200/83 kHz DualBeam PLUS sonar system with wide coverage.
Used to power the Fishfinder on/off and adjust backlight/contrast.
Has multiple functions depending on view, menu, or situation.
Instructions on how to add detailed charts using an SD card.
Instructions on how to set up an online account for software updates.
Explains the significance of the sonar display and data interpretation.
Controls how sonar returns are displayed, with Max and Clear Modes.
Explains marking waypoints, creating routes, and tracking paths.
Guides on how to navigate to a cursor position or selected waypoint.
Options for Normal, Simulator, and System Status modes during power up.
Provides standard menu options organized under tabbed headings.
Steps to resolve issues when the Fishfinder does not power up.
Covers common display issues and their possible causes and solutions.