Need help?Do you have a question about the Humminbird NMEA 2000 and is the answer not in the manual?
General| NMEA 2000 Compatibility | Yes |
|---|---|
| NMEA 2000 Certified | Yes |
| Data Transfer Rate | 250 kbit/s |
| Connector Type | Micro-C |
| Compatibility | Compatible with NMEA 2000 networks and devices |
Describes connecting the NMEA 2000 module to one network and one control head.
Illustrates connecting the NMEA 2000 module to multiple control heads.
Details the connection of the NMEA 2000 module to an Ethernet switch.
Shows how to connect the NMEA 2000 module to an 1100 Series control head.
Displays system status information for the NMEA 2000 system.
Lists the Parameter Group Numbers (PGNs) supported by the NMEA 2000 system.
Guides on selecting NMEA2K sources and GPS positioning data.
Covers alarm configurations and different data display views for NMEA 2000 data.
Explains how to select and display various NMEA 2000 data readouts and access submenus.
Lists components for installing AS 12RD2KW and AS 21RD4KW Radar units.
Details power wiring and Ethernet port connections for RADAR systems.
Shows RADAR system status and the connectivity of its accessories.
Explains RADAR menu access and settings for transmission and standby times.
Covers initial RADAR setup parameters like Tune, Trigger Delay, and Blanking.
Details Main Bang Suppression and Heading Line adjustment for optimal RADAR performance.
Accesses key RADAR settings including transmission modes.
Explains how to adjust Gain, STC, and FTC for optimal RADAR signal clarity.
Covers range settings and tools for Electronic Bearing Lines and Variable Range Markers.
To Next Page
