Need help?Do you have a question about the Humminbird PiranhaMAX 143 and is the answer not in the manual?
General| Basemap | Yes |
|---|---|
| Purpose | Personal |
| Product color | Black |
| Electronic compass | - |
| Protection features | Water resistant |
| Display diagonal | 4 \ |
| Display resolution | 160 x 128 pixels |
| Display technology | LCD |
| USB port | No |
| Battery life (max) | - h |
Weight and Dimensions| Depth | 82 mm |
|---|---|
| Width | 110 mm |
| Height | 170 mm |
| Weight | - g |
Guidance on selecting the optimal location for mounting the control unit.
Instructions for connecting the control head power cable to the boat's electrical system.
Steps to assemble the tilt or tilt and swivel mounting base for the control head.
Procedure for connecting the transducer and power cables to the control head unit.
Detailed steps for mounting the transducer on the boat's transom.
Process for installing the transducer inside the hull of a fiberglass boat.
Information on mounting transducers compatible with trolling motors.
Description of the 200 kHz single beam sonar system and its coverage.
Description of the 200/83 kHz dual beam sonar system and its coverage.
Description of the 200 kHz and 455 kHz tri beam sonar system and coverage.
Adjusting the display backlight for optimal viewing in different lighting conditions.
Configuring the sonar sensitivity to adjust detail and clarity on the display.
Setting the display's depth range for accurate depth readings.
Adjusting the speed at which sonar information scrolls across the display.
Enabling and configuring the feature to display fish symbols and depth.
Selecting measurement units for depth, temperature, and other parameters.
To Next Page