12 13
6. AUTO TRIM
6.1 ABOUT THE FUNCTION
Automatic trim control delivers perfect running trim at all times. Having the
optimum running trim of your vessel means best performance, faster acceleration
and fuel savings.
If your vessel runs with high trim it is likely that you are using too much fuel
and not getting the speed that you could do. With Humphree Automatic Trim
Control you will always have the optimum trim on your boat, with out the need of
adjusting the trim system manually.
Automatic Trim Control is included with all our systems.
10 kn 30 kn
INTERCEPTOR DEPLOYMENT
SPEED
Example of AUTO TRIM curve.
AUTO TRIM is turned on by default. However, it is possible to deactivate. If
deactivated, the function tile will turn grey.
It is possible to manually adjust the trim angle to compensate for dierent
conditions, e.g. loading or sea states.
6. AUTO TRIM
6.2 HOW TO USE THE FUNCTION
To Next Page
Loading...
