Need help?Do you have a question about the Hundure RAC-920PE and is the answer not in the manual?
Details the main features and capabilities of the access controller.
Provides technical specifications such as processor, memory, input/output ports, and operating conditions.
Details the various wiring connections required for system setup and operation.
Identifies and describes the terminal connections on the controller unit.
Details the wiring diagram for connecting sirens and alarms to the ACU-30.
Explains how to connect electronic locks, both with and without the ACU-30.
Provides step-by-step instructions for physically mounting and installing the hardware.
Details the procedure for adding new card numbers and optional passwords to the system.
Explains how to delete a single card number and its associated access authorization.
Outlines the process for deleting all card numbers and access authorizations from the system.
Configures the duration the door remains unlocked after valid entry.
Sets the time delay for door sensor detection and alarm activation.
Allows changing the master code for system administration and security.
Defines how the door can be opened (card only, card/PIN, card/PIN+password).
Resets the device to its default factory settings, clearing all data.
To Next Page
General