Hunter 21618 User Manual

Fan Parts
(Not Drawn to Scale)
Hardware
(Drawn to Scale)
Washer,
Installer Choice
for Flush Mounting
Screw, LP Washer
Wood Screw
Wood Screw
Blade Assembly Screw
#6-32 x 3/8"
Sems Screws
Canopy Screw
Flat Washer
Wire Nut
Blade Set
Globe / Shade
Remote
Cradle
88
Remote
Transmitter
87
Remote Receiver
86
Balancing Kit
75
Motor / Housing Assembly
Canopy
Hanger Pipe
Assembly
Light Kit
Top Housing
16
Mounting Isolators
Rubber Blade Grommet
Globe Trim Ring
205
Ceiling Plate
2
Screw, 6-32x 1/2
CSK OHMS SEMS
116
Screw, 8-32 x 3/8
OHSEMS
207
3
202
Bulb
49
Ballast
272
Wire Nut
70b
70a
Before installing your fan, record the following information for your records and warranty assistance.
Missing / Broken Parts:
Call 1-888-830-1326
Fan does not work:
1. Reference the Trouble Shooting guide in
your Instruction Manual.
2. Call your Local Service Center.
3. Call Technical Support at 901-248-2222.
For additional information on:
Hunter Products Trouble Shooting
Dealer Location Service Center Locator
Call 1-800-448-6837
www.hunterfan.com
R
If parts are missing or damaged call 1-888-830-1326.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Model Name
Catalog No.
Serial No.
Date Purchased
Where Purchased
PARTS GUIDE
PARTS GUIDE
PARTS GUIDE
PARTS GUIDE
Using the Parts Guide below, check to make sure all parts are included in the box.

Hunter 21618 Specifications

General

Type	Ceiling Fan
Blade Span	52 inches
Number of Blades	5
Control Type	Pull Chain
Reversible Motor	Yes
Model	21618
Motor Speed	3
Blade Material	Wood
Warranty	Lifetime Motor Warranty

Summary

Fan Parts

Canopy and Mounting Hardware

Components for fan mounting and overhead attachment, including ceiling plate, canopy, and hanger pipe.

Light Kit Components

Parts associated with the fan's lighting fixture, such as the light kit, bulb, globe, and trim ring.

Motor and Housing Assembly

The central unit containing the motor, fan housing, and top housing.

Remote Control System

Components for wireless fan operation, including the transmitter, cradle, and receiver.

Balancing Kit

Kit used to balance fan blades for smooth operation and reduced wobble.

Hardware

Screws and Washers

Various fasteners and washers required for assembling different fan components.

Wire Connections

Connectors used for electrical wiring during fan installation.

Mounting and Vibration Dampening

Parts designed to secure the fan and reduce operational vibration.

Parts List Details