EasyManua.ls Logo

Hunter 27 the EDGE - Page 56

Hunter 27 the EDGE
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24. GENERAL CARE
52
cleaned by most dry cleaners. Dry clean only.
WOOD MAINTENANCE
Over time, the boat interior may exhibit normal signs
of wear and tear and reveal blemishes in the cherry
wood finish. To address light to heavy blemishes, we
recommend the following items be used within the
process:
220 sand paper
Mohawk Satin Top Coat
Mohawk Sealer
Cherry Glaze Blended Stick
Begin by sanding the blemish until it disappears.
Touch up the area with the cherry blended stick and
smooth out with a finger until well blended. If it is a
light blemish, conclude the procedure by applying the
Mohawk top coat until you achieve the desired look. If
it is a heavier blemish, apply the Mohawk Sealer and
allow to dry for 20 minutes. Apply any additional
coats if necessary, sanding between each coat.
Conclude the procedure by applying the Mohawk top
coat until you achieve the desired look.

Table of Contents

Related product manuals