Hunter 28.5 User Manual

•
•
•
Welcome to the Hunter Family
Congratulations on your new Hunter sailing yacht. We have
engineered and constructed your Hunter to be as fine a cruiser
as any afloat. In order to get the best performance and most en-
joyment from your boat you should be familiar with its various
elements and functions. Please take time to study this manual
and its recommendations for trouble-free sailing pleasure.
We stand behind the quality of your Hunter with a warranty
which you should also review.
To insure your warranty is
valid, please fill out the attached card and send it to us
within ten days of the purchase date. Section 15 of the
Federal Boat Safety Act requires first owners to be registered.
The warranty data should also be recorded in the space below
for your own reference.
You also need to fill out and mail the warranty cards on your
diesel auxiliary, battery, stove, head, electric water pump and
other accessories. These are enclosed in the manufacturers'
manuals which are included in your owner's pouch
(Hull Identification Number is on outside of transom. starboard side, upper corner. This number must he given in all necessary
communications.)
HUNTER OWNER INFORMATION CARD
DATE DELIVERED TO OWNER

Hull # 
Owner 
Street

City and State 
Zip 
Model

Size 
Hull # 
Engine Model 
Serial # 
Name of Boat 
Propeller Size

Dealer 
Street 
City and State 
Zip 
Dealer's Signature 
Owner's Signature


Hunter 28.5 Specifications

General

Length Overall	28.5 ft
Engine	Yanmar 2GM20F 18 hp
Designer	Hunter Design Team
Fuel Capacity	18 gal
Water Capacity	30 gal
Holding Tank Capacity	20 gallons

Summary

Limited Warranty

Warranty Effectiveness Condition

Requirement to return warranty card and service record within ten days of sale.

TUNING THE B&R RIGGING

Mast Tuning Procedure

Step-by-step guide for adjusting mast bend and ensuring straightness.

TUNING THE RIGGING

Mast Tuning Instructions

Steps for attaching stays, setting tension, and achieving mast plumb.

Rigging Care and Maintenance

ENGINE ALIGNMENT

Procedure for aligning the engine and checking for vibration after installation.

DIESEL ENGINE OPERATION

STARTING:

Step-by-step guide for starting the diesel engine safely and correctly.

MOTORING:

Instructions for operating the engine in forward and reverse gear.

Ship Systems Operation

REEFING THE MAINSAIL

Procedure for using the jiffy reefing system to reduce mainsail area.

Appliance and Surface Care

FIBERGLASS REPAIRS

Steps for patching hairline cracks or chips using gel coat and filler.

Sail, Teak, and Pump Maintenance

SERVICING OF PUMPS

Importance of checking pumps, hoses, clamps, impellers, and wiring.

General Maintenance and Winter Storage

STORING YOUR BOAT FOR WINTER

Important steps for winter storage, including cradle placement and preventing damage.

ENGINE WINTERIZATION

ENGINE WINTERIZING PROCEDURES

Hunter 28.5 Specifications

Hunter 28.5 Electrical Diagram

Hunter 28.5 Wiring Diagram

Hunter 28.5 Plumbing Diagram

Hunter 28.5 Construction Detail