Need help?Do you have a question about the Hunter 30300 and is the answer not in the manual?
General| Product Type | Air Purifier |
|---|---|
| Model Number | 30300 |
| Color | White |
| Room Size | Medium |
| Filter Type | HEPA |
| Voltage | 120 Volts |
Remove the unit from packaging and inspect for any damage or protective coverings.
Follow safety guidelines regarding high voltage, oxygen administration, and combustible gases.
Position the unit for optimal air circulation, ensuring clear airflow paths.
Turn the unit on and adjust the fan speed through multiple settings.
Engage the electrostatic precipitator via the 'ionizer' button; a green light confirms operation.
Understand the functions of the precipitator, speed adjustment, filter monitor, and automatic timer.
The filter monitor light signals when filters need checking or replacement.
Set the timer to automatically shut off the unit after a selected duration.
Ensure the unit is unplugged from the wall outlet before cleaning.
Remove and clean the front grille and its attached precipitator and pre-filter.
Handle precipitator parts with care due to sharp and delicate components.
Replacement filters are available as a single pack including mechanical and charcoal filters.
Replace filters with the white filter facing upwards and reset the filter monitor.
Check power cord, selector switch, and front grille interlock.
Clean the precipitator and replace filters as instructed.
Ensure the precipitator is clean and completely dry.
To Next Page
