©2013 Hunter Fan Company
7
Using Your Air Purifier (continued)
CLEANING THE UNIT:
WARNING! To avoid serious injury from electric shock ALWAYS turn the
air purier OFF and disconnect the plug from the outlet BEFORE cleaning.
Maintenance
OPERATION:
OFF - Unit off
LOW speed - Recommended for use when soft
background noise is unwanted.
MED speed - Typical usage setting. Soft
background noise is not an issue.
HI speed - Use when quick, efficient results
to a room’s air quality are desired.
The fan speed can be adjusted at any time by
rotating the dial so the dial indicator aligns with the
desired speed.
Press the UV
button to turn on and off the UVC
function of your air purier. UVC technology is
a proven germicide that is accepted by the FDA
and EPA as having the ability to kill pathogens in
air that are exposed to UVC light.
Press the ionizer button to turn on and off the
ionizer function. The ionizer improves the quality
of air in the room by releasing negative ions
into the air that attract positively charged dust,
smoke, and pollen particles.
Figure 6
Ionizer
UV
Dial Indicator
Clean the outside of the unit with a soft, damp cloth. The rear grill can be
cleaned in soapy water after it has been removed from the unit and the pre-
lter has been removed.
NOTE: Ensure the grill is completely dry before reinstalling it on the unit. Failure to
do so could cause damage to the lters or motor.
To Next Page
Loading...
