8
6725$*(
1. Perform the cleaning procedures described above.
2. Wipe all parts dry.
3. Pack the heater in a plastic bag and store it in a cool, dry p
lac
e.
We recommend that you store the heater in its original carton
.
7528%/(6+227,1*
If your heater fails to operate:
Make sure the electrical outlet or circuit breaker is working.
Check for obstructions. If you find an obstruction, turn the
heater OFF, and UNPLUG THE UNIT. Carefully remove the
obstruction and follow the reset instructions.
0$,17(1$1&(
1. Press the Power Button to turn the heater OFF and unplug
the heater before moving or cleaning.
2. Interior dust can often be removed by using a vacuum cleaner
with a crevice tool attachment.
3. To clean the enclosure, use a clean, soft and lightly damp
cloth to gently wipe off the dirt from the surface of the unit. Be
sure not to wet the heating element and the switches. Allow the
unit to dry completely before use.
4. Do not use cleaning liquid or other chemicals to spray on the
unit.
this occurs, the heater can only resume its normal operation after
resetting it. To reset the heater:
2. Unplug the heater and wait 10 minutes for the unit to cool down.
1. Turn the Power Control to OFF position.
3. After the 10 minutes, plug the unit in again and operate normally.
81614-01 R20200301
This heater is equipped with a safety tip-over switch. This feature
cuts the main power to the heater if it gets knocked over. If the
heater tips over, simply stand it upright and press the Power
Button to resume operation.
This heater includes an Overheat Protection System that shuts
the unit off when a potential overheat temperature is reached. If
To Next Page
Loading...