9
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Bulb Pull Chain
4 of 4
Thumb
Screws
Lift the globe assembly and attach it to the upper switch
housing using the four thumbscrews. Tighten all four
screws securely by hand.
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.
ON
Turn Power
Feed the pull chains from the fan switch and
the light switch down through the holes in the
upper switch housing as shown. Attach the pull
chain pendants to the light and fan pull chains.
The fan pull chain controls
the speed: from high to off.
The light pull chain controls
the light xture: on and off.
Installing the Pull Chains
Repeat x2
To Next Page
Loading...
