Hunter Beck - Canopy and Blade Mounting; Blade Arm and Blade Assembly

7
1886
1886
Installing the Blades:
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Bulb Pull Chain
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
Hunter Pro Tip:
Repeat x4
Repeat x4
x12
bag
Blade Arm Screw
Lightly attach the blade arms to the motor with
screws found in the hardware bag, then
securely tighten after both screws are attached.
Put the blade washers, found in the hardware bag, onto the
blade screws, found in the hardware bag. Then install the blade
screws to secure each blade to a blade iron.
x12
x12
bag
bag
Blade Screw
Washer
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Ridge
Light Kit