Need help?Do you have a question about the Hunter Gatlinburg and is the answer not in the manual?
Offers support via phone, website, and videos for installation.
Emphasizes the importance of keeping the manual for future reference.
Critical safety precautions regarding electrical shock, injury, and proper mounting.
Advises on wiring compliance, using qualified electricians, and using only manufacturer-approved parts.
Lists necessary tools for mounting the fan, distinguishing between outlet box and building structure mounts.
Details all included parts and hardware, categorizing them for easy identification.
Instructions to turn off power and essential safety warnings before starting.
Notes for flat ceilings and specifies minimum blade tip and bottom edge clearances from walls/floor.
Details securing the canopy mount to the building structure using screws and washers.
Explains how to attach the canopy mount to a fan-rated outlet box.
Guides connecting ceiling wires to the terminal block for single-switch operation.
Illustrates wiring connections for dual-switch control of fan and light.
Describes connecting the wiring harness between the canopy mount and the fan body.
Guides sliding the snap-on canopy over the downrod and into the mount.
Details how to attach the snap-on blades to the pre-installed blade irons.
Instructions for connecting the light kit plug to the fan fixture, aligning color markings.
Guides aligning the light kit notch with the fan bracket pin and rotating to lock.
Explains loosening thumbscrews, raising glass, and tightening securely.
Advises installing bulbs of the same wattage and replacing them when necessary.
Explains the functions of various remote control button presses and long presses.
Details how to change fan direction from downdraft to updraft and vice-versa.
Steps to diagnose and fix a fan that fails to operate, checking power and connections.
Guidance for resolving fan wobbling, checking blade installation and hanger ball seating.
Solutions for erratic remote operation, weak signal, or multiple remote interference.
Tips for diagnosing and fixing fan noise, focusing on blade installation and integrity.
Outlines the motor's limited lifetime warranty and other parts' one-year warranty.
Explains how to obtain service and lists items not covered by the warranty, like labor and cosmetic defects.
Step-by-step instructions for attaching the long downrod to the fan body, including threadlocker application.
Warnings about potential chemical exposure and securing the downrod assembly correctly.
To Next Page
General