EasyManua.ls Logo

Hunter HEPAtech 30721 - Remote Operation

Hunter HEPAtech 30721
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43007-01 8
Operation
Remote Operation
For your convenience, a remote control is provided with this air purier. The remote may
be used to turn the air purier on or o and adjust the fan speed.
Operating the Air Purier with the remote:
1. Install two AAA batteries (UM-4 or IEC R03 or equivalent). Refer to the
graphics in the battery compartment for proper orientation of the bat-
teries.
WARNING: Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc), or rechargeable (nickel cadmium) batteries.
2. To use the remote, point it at the air purier, then press and release the
appropriate key. The key functions are as follows:
When the keypad is locked, the remote may still be used to adjust the speed or turn o
the air purier.
If the remote is not working properly, rst be sure that the remote is facing the air purier
when pressing the key. If it still does not work, check the batteries.
OFF SLEEP ACTIVE TURBO CLEAN

Related product manuals