Hunter M3633-01 - Page 18

Monday - Friday 8am - 6pm CST
Saturday 11am - 4pm CST
(English or Español)
1.888.830.1326
www.HunterFan.com
Remote & Cradle (continued)
Quickly press the Light button to turn
the lights off and on. Hold the Light
button to raise and dim the light level.
Dimming Mode: To enable dimming,
your remote must be set to Dimming
Mode. To toggle Dimming Mode on
or off, long press the “Fan Speed Up”
button and “Fan Speed Down” button.
The Fan On/Off button turns the fan
on or off. Adjust the fan speed using
the “Fan Speed Up” or “Fan Speed
Down” directional buttons.
Fan Speed Up
Fan Speed
Down
Fan On/Off
Light On/Off
The remote transmitter is already paired to the
receiver and ready to use.
Note: If your need to pair your remote, turn fan
power off and back on at the wall switch. Within 3
minutes, press and hold both the Fan Off button
and the High button for 4 seconds to pair the
remote. To prevent faulty operation, please
ensure all other ceiling fans within range are
turned off at the wall switch while pairing.
18
M3633-01 • 01/03/17 • © 2017 Hunter Fan Company