Need help?Do you have a question about the Hunter Spring Mill and is the answer not in the manual?
Lists essential tools like ladder, screwdriver, pliers, wire strippers, drill, and drill bit for fan installation.
Details components included in the box and provides tips for organizing hardware bags by symbol.
Specifies minimum clearance requirements from blades to walls and floor for safe fan operation.
Guides on checking ceiling angle for standard and vaulted ceilings, noting requirements for angled mounts.
Details two options for securing the ceiling bracket using machine screws or wood screws.
Step-by-step instructions for installing the downrod, including wire preparation and setscrew tightening.
Instructions on how to lift and place the fan housing onto the ceiling bracket, ensuring secure connection.
Connects fan wiring to ceiling wires for a single wall switch setup, including grounding.
Connects fan wiring for dual wall switches, separating fan and light circuits, including grounding.
Guides the user through fitting and securing the canopy to cover the ceiling bracket and wiring.
Details the process of attaching each fan blade to the blade irons using specific hardware.
Step-by-step assembly of the light kit, connecting plugs and securing with screws.
Instructions for attaching pull chain pendants and installing light bulbs into the fixture.
Guides installation of the cage assembly, aligning keyhole slots and tightening screws.
Explains how to use the reverse switch inside the fixture to change fan direction for updraft or downdraft.
Steps to diagnose and fix issues like the fan not working or excessive wobbling.
Guidance on identifying and resolving noisy fan operation, including blade checks.
Details the process for obtaining warranty service, including required proof of purchase and contact methods.
Outlines what the motor and other parts warranty covers, including exclusions and limitations.
Explains how state laws affect warranty coverage and the specific legal rights granted to consumers.
Follows steps to remove standard downrod pipe and reassemble with a new downrod of a different length.
To Next Page
General
