Hunter Spring Mill - Installing the Canopy; Securing the Canopy; Installing the Fan Blades; Attaching Blades to Blade Irons

7
8
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Bulbs Cage
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Installing the Blades:
Repeat x4
Secure each blade to a blade iron as shown using the blade nuts,
found in the hardware bag, and the blade assembly screws,
found in the hardware bag.
x12
bag
Blade Nut
x12
bag
Blade Screw
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.