Need help?Do you have a question about the Hunter Swanson and is the answer not in the manual?
General| Category | Ceiling Fan |
|---|---|
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Motor Type | AC |
| Light Kit Included | Yes |
| Remote Control Included | Yes |
Secure bracket to an existing fan-rated outlet box using machine screws.
Connect ceiling wires to the fan's terminal block using the provided diagram.
Disconnect power, follow codes, ensure fan is grounded. Consult electrician if unsure.
Always tighten setscrew with pliers to prevent fan fall hazard. Do not hand tighten.
Connect the wiring harness from the ceiling bracket to the receiver, matching colored wires.
Connect fan wiring harnesses to the receiver, matching colored wires.
Use blade washers and screws to attach each blade to its blade iron.
Lightly attach blade arms with screws, then securely tighten after both screws are on.
Assemble switch housings, connect wires, and secure with screws, ensuring tightness.
Ensure all screws are tight for upper and lower housings to prevent fan fall hazards.
Install bulbs and securely attach glass shades, following all safety warnings.
Troubleshoot fan not working, noisy operation, and excessive wobbling.
To Next Page
