7
8
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Bulbs/Glass
x10
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Repeat x5
Blade Arm Screw
Remember the screws that you
kept after removing the shipping
blocks? You need them here.
D
I
S
C
A
R
D
K
E
E
P
!
Repeat x5
Put the blade washers, found in the hardware bag, onto the
blade screws, found in the hardware bag. Then install the blade
screws to secure each blade to a blade iron.
x15
x15
bag
bag
Blade Screw
Washer
Installing the Bulbs and Glass
Fan style may vary.
Note:
Fan style may vary.
Note:
To Next Page
Loading...
Need help?
General
