Need help?Do you have a question about the Hunter Sona 83007 and is the answer not in the manual?
Key safety points to reduce fire, shock, or injury risks during operation.
Important precautions for proper and safe usage, avoiding damage.
Instructions for cleaning the fan's protective grille and motor assembly.
Details on motor lubrication and replacement if noise occurs.
Critical step to disconnect power and lock the service panel before servicing the unit.
Lists all components included in the fan package with their part numbers for reference.
Lists the necessary tools that are not supplied with the product.
Provides an estimated duration for completing the installation process.
Instructions for safely removing the motor/blower assembly from the main housing.
Steps to prepare the housing, including removing packing, screws, and covers.
Guide to choosing the correct installation path based on construction type and access.
Instructions for marking the correct depth on the joist for sheetrock thickness.
Steps to screw the unit into the joist or framing using pre-loaded screws.
Guidance on routing wires through the strain relief and using suitable wire types.
Visual guide for making electrical connections between the fan motor and switches.
Instructions for securing the wiring cover plate, ensuring connections are enclosed.
Steps for connecting the 4" duct and venting it outdoors, including taping joints.
Instructions for connecting the wiring harness and reinserting the motor into the housing.
Steps to turn on the power and test the unit's operation.
Directs the user to the next section for attaching the grill assembly.
Steps for sliding mounting rails into brackets and positioning them correctly.
Instructions for marking screw positions and drilling pilot holes in the joist.
Guidance on inserting screws and attaching the mounting rails to the joists.
Instructions for tightening screws to secure the installed mounting rails.
Guidance on routing wires, making connections as per the diagram, and installing the cover plate.
Steps for connecting the 4" duct to the fan and venting it outdoors.
Instructions for connecting the wiring harness and reinstalling the motor securely.
Steps to turn on the power source and test the fan and light operation.
Directs the user to the next section for attaching the grill assembly.
Steps for removing an old fan and preparing the ceiling opening for the new housing.
Instructions for sliding mounting rails into brackets and positioning for screws.
Guidance on marking screw locations and positioning the unit based on sheetrock thickness.
Steps for drilling holes, inserting screws, and attaching the mounting rails.
Instructions for connecting the 4" duct and venting it to the outside.
Guidance on routing wires through the strain relief for supply connection.
Instructions for tightening the screws on the strain relief bracket.
Visual guide for electrical connections and installing the wiring cover plate.
Steps for connecting the main wiring harness to the unit.
Instructions for reinserting and securing the motor into the housing.
Steps to turn on the power and test the fan and light operation.
Directs the user to the next section for attaching the grill assembly.
Steps for removing an old fan and preparing the ceiling opening for the housing.
Instructions for moving the housing into place and routing wires through strain relief.
Steps for attaching ducting and screwing the unit into the joist or framing.
Visual guide for electrical connections and installing the wiring cover plate.
Instructions for connecting the wiring harness and reinstalling the motor.
Steps to secure the motor by tightening the screws.
Steps to turn on the power and test the fan and light operation.
Directs the user to the next section for attaching the grill assembly.
Instructions for removing the thumbscrews that secure the grill.
Steps for connecting the wiring harness of the grill fixture.
Instructions for positioning and screwing in the strain relief bracket.
Steps for aligning posts and sliding the light fixture over them.
Instructions for attaching thumbscrews and installing the required bulbs.
Guidance on aligning and securing the glass dome assembly onto the light fixture.
Solutions for when the fan fails to turn on, checking power and connections.
Solutions for when the light does not turn on, checking bulbs and wiring.
Troubleshooting steps for addressing unusual or excessive noise from the fan.
Information for obtaining assistance with setup, operation, or replacement parts.
Explains the terms of the limited warranty for parts and motor failures.
Outlines conditions that void the warranty and specific exclusions.
Procedures for contacting service centers and requirements for warranty claims.
To Next Page
General
