Hunter Sona 83007 - New Construction - Suspended Between Joists: Mounting; Installing Mounting Rails; Marking and Drilling for Screws; Attaching Rails to Joists

41951-01
8
Slide the mounting rails into brackets.
Mark position of screws by using holes as a template.
Insert screws, leaving space between the screw
head and the joist. Screws are not provided.
New Construction – suspended between joists
B11
E
F
5/8
1/2
5/8
1/2
B12
1/8” bit
B14
B15
B16
F
B13
Position the correct depth mark at the bottom edge of
the joist based on the thickness of your sheetrock.
Drill a hole in the center of each outline.
Attach the rails onto the screws.
R20210722