Hunter Sona 83007 - New Construction - Attaching to Joist: Final Steps; Connecting and Reinstalling Motor; Powering On and Testing; Proceed to Grill Attachment

41951-01
7
A19
J
A20


A17

I
A18
ON
OFF
A21 A22
Secure the motor by tightening the 2 screws. Turn on the power source.
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched between
the motor and the housing.
Test the motor. If the motor does not run,
check the plug connection.
E1
Go to step
on page 17
to attach grill.
R20210722