Hunter Sona 83007 - New Construction - Suspended Between Joists: Final Steps; Wiring Harness and Motor Reinstallation; Powering On and Testing; Proceed to Grill Attachment

41951-01
10
B27
B22
I
I
B23
B25
Turn on the power source.
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched
between the motor and the housing.
ON
OFF
B26
Test the motor. If the motor does not run,
check the plug connection.
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
B24
J
Secure the motor by tightening the 2 screws.
E1
Go to step
on page 17
to attach grill.
R20210722