Hunter M3633-01 - Page 8

Monday - Friday 8am - 6pm CST
Saturday 11am - 4pm CST
(English or Español)
1.888.830.1326
www.HunterFan.com
Light Kit (continued)
Make sure the light kit assembly is securely attached to the
motor housing. Failure to properly secure all three assembly
screws could result in the light xture falling.
Insert a third light kit assembly screw,
found in the hardware bag, into place
and tighten all three screws securely.
Carefully push all switch housing
components into the switch housing,
then install the switch housing plate
using two light kit assembly screws,
found in the hardware bag.
8
M3633-01 • 01/03/17 • © 2017 Hunter Fan Company