Step 2 – Add camera to APP account
1. Slide the Power Switch to “SETUP” position, wait 60 seconds.
Then enter “MENUàOtheràQR Code” to get camera unique
QR code.
2. Click “Add CameraàNext” in the APP, scan the camera QR code
to add camera to your APP account.
Step 3 – Choose data plan
Every new camera comes with 1 free Coin which you can find in
“APPà Account”.
Hunter SIM card:
1. Exit to APP home screen ( Cameras), then tap on icon to
enter camera setting list page.
2. Choose “Refill” to top up your account, then exit to camera setting
list page. You will receive a top-up notification by email.
Note! 1 free Coin is included in your APP account.
3. Click “Activate SIM Card” to choose preferred data plan
Other brand SIM card:
1. Camera will connect to 4G network automatically after SIM card is
inserted.
If “SIM Automatch failed, pls enter setups manually” pops up on
screen, go to “SETUPàMENUà Camà 4G Setupà Manual” and
fill in your SIM card operators 4G APN, Username and Password.
Note! It is not a must to enter Username and Password of APN, but
some operators require this password access to get connection on
their 4G network. Check with your SIM card operator to get this
confirmed.
2. Activate and top-up your SIM card with data.
3. In the “APPà Account”, tap “Add Credits”, “OK”, “Add
HunterCam Credits”. With 1 free Coin you will get 1000 free
credits.
To Next Page
Loading...
