38
INSTALL ADJUSTABLE LEG
1. Locate the two mounting holes near the corner on the rear of the balancer.
REAR OF
BALANCER
Figure 68
2. Loosely secure the balancer leg, 14-1109-005, to the wheel balancer with the two 1/4-20 x 1/2 inch self-
tapping screws, 75-317-2.
ADJUSTABLE LEG
14-1109-005
Figure 69
3. Adjust the balancer leg to have 1/8 inch (3 mm) clearance to floor and tighten the 1/4 inch screws. Do not let
leg touch the floor.
To Next Page
Loading...
