Need help?Do you have a question about the Hunter SmartWeight Touch and is the answer not in the manual?
General| Brand | Hunter |
|---|---|
| Model | SmartWeight Touch |
| Category | Wheel Balancers |
| Language | English |
Provides operation instructions and information for the SmartWeight Touch®/GSP9200 Touch Balancer.
Details hazard definitions, important safety instructions, and precautions for safe operation of the balancer.
Identifies and describes the main components of the SmartWeight Touch®/GSP9200 Touch balancer.
Details the components and layout of the main operating screen of the balancer.
Explains how to operate the balancer, including main balance screens, error pop-ups, and prompts.
Explains balancing theory, static imbalance, and couple imbalance.
Introduces SmartWeight Balancing Technology and its static/dynamic imbalance sensitivity.
Details how SmartWeight® uses dynamic weight planes for balancing.
Explains how to use SmartWeight® balancing and its force display variations.
Details the procedure for mounting a wheel using the optional wheel lift feature.
Provides instructions on properly mounting a wheel onto the balancer spindle shaft.
Explains how to use the CenteringCheck feature to verify wheel mount centering.
Covers common and reliable methods for mounting wheels using collets.
Details the use of the plastic wheel mounting spacer for scratch prevention and centering.
Explains front collet mounting, generally not recommended but used when backside mounting is impossible.
Describes the use of the optional 9-inch alloy wheel pressure cup.
Provides methods for heavy wheel centering, overcoming gravity against the hub or spacer.
Details centering wheels using lugholes and center bore with a flange plate and collet.
Explains the use of the pressure ring and spacers for mounting.
Describes hub ring spacers used for larger pockets or dual wheel configurations.
Explains how hub centric wheels align to the hub via the center bore.
Details lug centric wheels, centered by lug holes, and how to verify.
Explains how the balancer tracks and stores spin data for wheel assemblies.
Describes how the balancer stores and allows viewing of balanced wheel assemblies.
Details the printout feature for detailed measurement images and stored data.
Explains SmartWeight® Balancing Technology as a method to reduce forces on a wheel.
Details dynamic balancing as the default and recommended method for accurate wheel balancing.
Guides on switching from SmartWeight® to traditional dynamic balancing.
Explains how to take wheel dimensions using Dataset® arms or manual entry.
Details measuring inner clip dimensions using the inner Dataset® arm.
Explains measuring inner tape dimensions using the inner Dataset® arm.
Details measuring outer tape dimensions using the inner Dataset® arm.
Explains entering spoke positions for hidden tape weights.
Details measuring outer clip dimensions using the outer Dataset® arm.
Explains measuring inner and outer clip dimensions using both Dataset® arms.
Provides the procedure for balancing using clip-on weights.
Details how Dataset® arms provide instant and accurate weight position measurements.
Explains how to split a weight into two smaller weights for better distribution.
Details using Split Weight® to correct large imbalances with multiple weights.
Details the BDC laser locator for fast adhesive weight positioning.
Explains the HammerHead® TDC Laser System for clip-on weight positioning.
Provides access to video tips and procedures for using the balancer.
Explains how to access Hunter Help for tips and procedures.
Details creating and recalling custom vehicle summaries for printouts.
Explains the Quick-Thread® feature for assisted wing nut installation and removal.
Describes the optional Auto-Clamp™™ spindle for pneumatic clamping.
Details the DC motor drive for positioning, holding, and controlling spindle rotation.
Explains the Spindle-Lok® feature for locking and stabilizing the spindle.
Details the hood autostart feature for automatic spin upon hood closure.
Provides access to equipment information and setup options.
Allows the operator to check balancer calibration.
Accesses the setup screen for configuring balancer settings.
Details the process of installing and removing USB drives and security keys.
Guides on calibrating various systems of the balancer.
Explains the automatic calibration system requiring no further operator input.
Provides access to diagnostic information for data acquisition circuits.
Guides on testing the balancer's keypad and switches.
Accesses the eCal™™ diagnostic tool for calibration checks.
Details the Test Spindle Encoder screen for encoder diagnostics.
Explains how to access and interpret Dataset Arm Sensor diagnostics.
Provides instructions for safely cleaning the balancer's display screen.
Details cleaning and lubrication of the spindle hub face and shaft.
Information on maintenance and service for the BDC Laser Locator.
To Next Page
